Go Back   planetArmor > planetArmor Features > Photos: In-progress Blogs

Photos: In-progress Blogs Post your in-progress photos in a blog-style topic!
Request vBench Photo Upload Access

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-07-2009, 02:55 PM
Moon Puppy's Avatar
Moon Puppy Moon Puppy is offline
vBench
 
Join Date: Oct 2008
Posts: 305
Dragon M3 GMC75

Here comes my second Vbench!

I started the Halftrack a while back. Some of it for a review so I figured to go ahead and do the whole thing. Been wanting to share with you guys my builds but I haven't done any armor since the last Halftrack, which is still unfinished, waiting for me to tackle pigments.

So away we go!




Ok, here's what I have, Dragon's M3 GMC75. Going to use all this Griffon PE and the chevron tires left over from the M2A1 I did last year.

Just have to pick a subject, going to be from North Africa for sure, I think I'm pretty safe saying this dueled in the sun during Operation Torch. I'm sure someone can check me on that if i'm wrong. Will update with I start cutting sprues and sniffin' glue.. :face: (that's the nontoxic Tanex7 variety for those who are humorless).





I've got it primed now but have some other stuff to add to it, think this is about all the soldering I'm going to do.

Looking over the 4 separate sets of instructions and trying to figure out which way to go, I thought I would start with what looked to be the most difficult. The Gun Mount.



I can understand how you Armor Nuts...I mean Folks really enjoy working in this genre when you have folks like Griffon supplying stuff like this barrel.


I like the way Dragon treated the kit barrel, instead of two halves running the length of the barrel, resulting in a seam that needs to be address, this is 4 slide molded tubes that connect one to the other. Not really anything wrong with the kit part.


But this one will be used...


The kit Gun Mount, nice part within itself...


...that is cut to shreds. The options we have with this mount is early vers, late variants, just like so many builds we face today. I'm going early, more complex.

And a quick dry fit and test. hoping the digital camera can pickup some problems thus far. Looks good to me, if you see anything wrong please let me now.
Reply With Quote top
  #2  
Old 12-07-2009, 03:12 PM
no_man_army no_man_army is offline
vBench
 
Join Date: Jul 2009
Location: England, Kent
Posts: 637
very nice,
Reply With Quote top
  #3  
Old 12-07-2009, 03:34 PM
Don's Avatar
Don Don is offline
vBench
 
Join Date: Aug 2008
Location: Europe, Hungary, Hatvan
Posts: 122
Send a message via MSN to Don
Hi!

Nice detailing! I will follow this project with interest!

Cheers,
Reply With Quote top
  #4  
Old 12-08-2009, 09:07 AM
RickLawler's Avatar
RickLawler RickLawler is offline
vBench
 
Join Date: Jan 2007
Location: Portland, Oregon
Posts: 3,092
Bring on the Brass! Looks great, Bob.

Rick
__________________




Vbench
Reply With Quote top
  #5  
Old 12-08-2009, 10:44 AM
Moon Puppy's Avatar
Moon Puppy Moon Puppy is offline
vBench
 
Join Date: Oct 2008
Posts: 305
Ohhh....my brass encrusted and solder scared brother, Rick. Not again, As much as I love that first halftrack I'll never do it again. Plastic doesn't have to burn to bond.

You have to wonder why Lion's Roar or anyone else hasn't come out with other kits like that one we built. Guess it's because only a few sadistic freaks like us would even think of tackling that thing!
Reply With Quote top
  #6  
Old 12-14-2009, 08:59 AM
Moon Puppy's Avatar
Moon Puppy Moon Puppy is offline
vBench
 
Join Date: Oct 2008
Posts: 305
Got some more work done but doesn't look like it.




Got some more work to do to it and then prime and paint it. I'm not going to try to paint like some of you guys painting the complete build, don't know how you guys paint completed builds.

Get this done and start the traditional building starting at the chassis and working up.
Reply With Quote top
  #7  
Old 12-14-2009, 08:35 PM
Plushy's Avatar
Plushy Plushy is offline
vBench
 
Join Date: Jan 2006
Location: S-Mart
Posts: 676
Looking Good Puppy
__________________



An oldie but not so much a goody
http://www.youtube.com/watch?v=qf4xwsZEpus
Morris Minor and the Majors `Stutter Rap `
Reply With Quote top
  #8  
Old 06-30-2010, 11:20 AM
Moon Puppy's Avatar
Moon Puppy Moon Puppy is offline
vBench
 
Join Date: Oct 2008
Posts: 305
I'm going to take Laura's lead and blame the other site for my lack of participation here. Sorry folks. I do get by from time to time to gawk but they seem further apart lately.

Here's an update I think y'all will like. Doing the Darby's Rangers 75mm GMC that Ken Abrams researched. Should be able to do a fair representation since he's guiding me through yet another Halftrack saga. So here we go.

Sorry for the bad picture, should have turned the flash off.


Here are the parts. I cut the kit part large spring from the connector rod that attaches to the idler. Just like Ken did, but I drilled a hole in the center and glued a .5mm rod for a guide. Then took either a .8 or 1.mm rod and wrapped solder around it, tight. Took some thin brass sheet and punched out a washer for the end of the spring. Then I took a 1.5mm bass pipe and soldered a .8 rod to use as a collar to attach to the mount point on the chassis. Hope this makes sense. Yes, all this could be done in plastic, I like working with solder and brass. I don't know why...


And here we are all together.


ugly picture!


The mount point on the other side did not come out as well as this one so I'm going to work on it again. I think I can do it again no problem. Besides it'll be covered with some mud when done so not biggy.


I may throw a bolt head to the end of the spring cylinder just to give it something else there at the open end.


And here are the springs on the de-ditching roller.

I like the right hand side better so all future pictures will be from the good side...


Thanks for looking, let me know what you think (other than me being nuts).
Reply With Quote top
  #9  
Old 07-02-2010, 01:38 PM
Panzerjaeger's Avatar
Panzerjaeger Panzerjaeger is offline
My Car has Zimmerit
 
Join Date: Dec 2009
Location: Chicagoland
Posts: 890
Looking good!

Yeah, nothing wrong with the kit part for the barrel, but metal is so much better if nothing else than for the weight and feel of it.
__________________
Andy

"The World has taken a turn for the surreal. . ."

vBench | Picasa Web Albums | AMPS Chicagoland
Reply With Quote top
  #10  
Old 07-04-2010, 12:13 PM
Lost legionar's Avatar
Lost legionar Lost legionar is offline
vBench
 
Join Date: Nov 2008
Location: Now the Sun sets on the SF Bay Area
Posts: 206
Talking Movie Star

Yes we have a movie star amongst us! (the build that is) Although Moonpuppy has his own reputation.

We'll have to get some paparazzi to click some pics from his (models) left side from time to time ...
he can't get away with his photogenic right side only!

Nice work by the way!
Reply With Quote top
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
I need 6 Dragon Pz. II /Marder II wheels and 6 Dragon 1941 pattern Jerry cans. bjohns52000@yahoo.com Market 0 01-28-2009 12:44 AM


All times are GMT -5. The time now is 03:30 AM.

Advertise with Us

Powered by vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
planetArmor