Go Back   planetArmor > planetArmor Features > Photos: In-progress Blogs

Photos: In-progress Blogs Post your in-progress photos in a blog-style topic!
Request vBench Photo Upload Access

Reply
 
Thread Tools Search this Thread Display Modes
  #141  
Old 07-25-2019, 06:12 AM
Fledermaus's Avatar
Fledermaus Fledermaus is offline
Senior Member
 
Join Date: May 2007
Location: Puerto Rico
Posts: 433
Hi people! Work on the ammo cars continues, so here we go…

It is time to make the cool air conduits connectors, flexible tubes were connected to this
So air conditioned air can circulate from one car to the next, this was needed to keep the
Powder charges at a low temperature to maximize its performance

In this photo you can see the cars connected with the flexible tubes


The connectors, two on the front and two on the back






To make this I used a piece of aluminum tube 12.4mm x 3.30mm


You need 4 for each car


A disk of .70mm x 13.6mm is glued to the back of each piece


Next another 13.6 disk is trimmed down to 12.4mm leaving 3 “ears” of
About 1.5mm equally spaced around the disk


The disks are trimmed to 12.4mm (the same diameter as the tubes) with a file


It should look like this




Using a knife the ears are cut open in the middle so a bronco models wing nut
Can be glued into it




I used two small pieces of styrene and glued to the sides of the wing nut


The wingnuts are to hold the cover in place when the conduits are not used
It all looks like this when finished, you need to make 8 of it in total


Now the conduits are glued in place, 3mm over the upper step and 8mm from the
top corner of the doors




Next the brake system is made, for this a piece of square styrene 4.7 x 4.7 4mm long
Is used.




The front is covered with a piece of styrene
__________________
"Don't be afraid of the model,it's you the one holding the knife"
Reply With Quote top
  #142  
Old 07-25-2019, 06:14 AM
Fledermaus's Avatar
Fledermaus Fledermaus is offline
Senior Member
 
Join Date: May 2007
Location: Puerto Rico
Posts: 433
I used the hand wheels from the dragon cars and a piece of 1.2 x 11mm long rod
With a small base 2.5 x 2.5 of .40 styrene to finish the mechanism

The finished brake system




Now I started the doors,


The doors are already cut from the front panels, so only the details need to be made
I started with the hinges, made from .90 x 5mm styrene rod cut in 4 pieces


The hinge plates are made from .30 styrene 2.5 x 2, 12 pieces for each set of doors


The doors in place with the hinge pins


The small top door hinge plates are .70 styrene 2 x 2.5mm with a .30mm x 20mm
Styrene rod




The doors handles are made using part #B4 from the dragon cars




The part is trimmed to shape






With the addition of the rails the cars construction is finished













The opened doors are being painted, that’s why this are
Missing now on both cars

A size comparison with my dragon stug III


Painting of the cars is almost finished, thanks for watching

Abdin
__________________
"Don't be afraid of the model,it's you the one holding the knife"
Reply With Quote top
Users like Fledermaus's post!
  #143  
Old 07-25-2019, 04:10 PM
Glaurung's Avatar
Glaurung Glaurung is online now
vBench
 
Join Date: Nov 2005
Location: Tallinn, Estonia
Posts: 165
I really love your attention to detail and the correctness of your scratch work.
It has been one of the most enjoyable build to follow so far.

Slow but steady - keep it going, mate.


Kristjan
Reply With Quote top
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
1/35 Dora camokid Market 0 08-16-2011 12:21 PM
My Dora SDKFZ Photos: In-progress Blogs 45 03-10-2009 09:19 PM
Soar Art Dora HairySteve Axis: World War II 11 10-05-2008 06:13 PM
Dora dio James Tainton Axis: World War II 1 08-27-2007 04:55 AM
Dora 1/35 Scale brokeneagle Photos: In-progress Blogs 41 07-23-2007 09:00 AM


All times are GMT -5. The time now is 09:44 AM.

Advertise with Us

Powered by vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
planetArmor