View Single Post
  #34  
Old 10-21-2007, 09:18 AM
Flak Flak is offline
vBench
 
Join Date: Jan 2005
Location: Hong Kong
Posts: 4,152
Step 5 - Building the Suspension Unit

DML has provided the wrong Suspension Units for PZII F...the Suspension Units are from their pervious Marder II kit...here is the re-work progress...

Step 1 - I used 0.2mm thickness brass plate to re-make the Leaf Springs...
Step 2 - Glued the 13 pieces narrow new Leaf Springs together...
Step 3 - Cutted the upper DML's Bell Crank...
Step 4 - Core out (File and sand) the upper Bell Crank to 0.2mm thick...
Step 5 - File and sand) the rear Bell Crank without the step...
Step 6 - Core out (File and sand) the wall thickness of the rear Bell Crank to 0.2mm thick...



Step 7 - I used 0.1mm brass plate to re-make the last bracket...and putty time...



Step 8 - The DML's Bell Crank is in wrong shape...



Step 9 - I used the 0.2mm brass plate and 0.3mm brass rod to re-make the bracket...

Reply With Quote top