jdun91764
07-14-2004, 02:07 PM
The Dragon Stug 3 and railcar are somewhat nearing completion. I used Archer transfers for the stenciling on the flat car. Still a long way to go with the weathering.
http://www.network54.com/Realm/railcar/1.JPG
http://www.network54.com/Realm/railcar/2.JPG
The weathering on the Stug tracks is not even. I noticed this after it was pointed out in a previous post. I need to address this as well as some other things, namely that damn rust that is too prevalent.
http://www.network54.com/Realm/railcar/3.JPG
I found a suitable base for the dio- but now I do not have enough track to go across it- crap!I have some Verlinden resin rail that may work. I have to dig it out and give it a go. I hope the guage is the same-
http://www.network54.com/Realm/railcar/4.JPG
A lot more stowage to be added to the Stug and the rail car as well, still being painted and weathered.
http://www.network54.com/Realm/railcar/5.JPG
Check the rear of the Stug in this photo- see how rusty it looks.
It appears way over the top. (See Next Photo)
The ends of the flat car and the wheels still need more weathering; more filters and some washes should do the trick. Of course, I will spray some MMP Powders near the bottom for the "rail road" dust that seems to be stuck to anything near a rail road. I am liking this more and more as time goes on.
http://www.network54.com/Realm/railcar/6.JPG
Now check the same area in this photo- it looks much better. It appears more dirty than rusty. This is the lighting trouble I am having. The red tones are really brought out by this flash. When the lighting is right- the model looks much better.
http://www.network54.com/Realm/railcar/7.JPG
After all the weathering, I will go over the metal areas with some graphite and a little silver mixed with burnt umber to tone it down a little; the old Verlinden trick of "metalizing". I will add some light colord MMP Powders to the flat car- weathering the wood. It still looks polished to me. The rust on the Stug is really brought out by the flash- still working on lighting. I need to tone that down when I redo the track weathering to even it out.
http://www.network54.com/Realm/railcar/1.JPG
http://www.network54.com/Realm/railcar/2.JPG
The weathering on the Stug tracks is not even. I noticed this after it was pointed out in a previous post. I need to address this as well as some other things, namely that damn rust that is too prevalent.
http://www.network54.com/Realm/railcar/3.JPG
I found a suitable base for the dio- but now I do not have enough track to go across it- crap!I have some Verlinden resin rail that may work. I have to dig it out and give it a go. I hope the guage is the same-
http://www.network54.com/Realm/railcar/4.JPG
A lot more stowage to be added to the Stug and the rail car as well, still being painted and weathered.
http://www.network54.com/Realm/railcar/5.JPG
Check the rear of the Stug in this photo- see how rusty it looks.
It appears way over the top. (See Next Photo)
The ends of the flat car and the wheels still need more weathering; more filters and some washes should do the trick. Of course, I will spray some MMP Powders near the bottom for the "rail road" dust that seems to be stuck to anything near a rail road. I am liking this more and more as time goes on.
http://www.network54.com/Realm/railcar/6.JPG
Now check the same area in this photo- it looks much better. It appears more dirty than rusty. This is the lighting trouble I am having. The red tones are really brought out by this flash. When the lighting is right- the model looks much better.
http://www.network54.com/Realm/railcar/7.JPG
After all the weathering, I will go over the metal areas with some graphite and a little silver mixed with burnt umber to tone it down a little; the old Verlinden trick of "metalizing". I will add some light colord MMP Powders to the flat car- weathering the wood. It still looks polished to me. The rust on the Stug is really brought out by the flash- still working on lighting. I need to tone that down when I redo the track weathering to even it out.